Belkin RT3200 Guide De L'utilisateur page 7

If you're adding this router to your existing RT3200 EasyMesh Wi-Fi, follow these steps.
Note—If you have used this router before, reset it to factory default settings before adding it to your
EasyMesh Wi-Fi. You can do this in the Administration tab of the router's settings or by pressing and
holding the reset button on the back of the router for 10 seconds.
Using a computer or mobile device, connect to your parent router (the one connected to your
•
modem) wirelessly or with an ethernet cable
Visit myrouter.local in a web browser to log in to the parent router's settings
•
You also can enter 192.168.1.1 in a browser to access the parent router's settings
o
—
Note
go to www.belkin.com/support/setupIP for more help.
• Enter the parent router password. (Default is "admin".)
Go to Wi-Fi > Basic Wireless Settings and click on Add a new node
•
Note—"EasyMesh Parent Node" must be enabled on your parent router setting before you click the
"Add a new node" button.
• Follow the prompts to add the node to your existing EasyMesh Wi-Fi network.
Note—If you are adding this router to a parent node from another manufacturer, please refer to the
manufacturer's instructions
If neither of those options take you to the parent router's settings login screen,
.
7