ION PRO200BT Guide D'utilisation Rapide page 7

Using Pro200BT with Your Computer
Recording to Your Computer
To record music to your computer, you can use EZ Vinyl/Tape Converter. EZ Vinyl/Tape
Converter conveniently saves your recordings to your computer. After you finish converting
your vinyl, you can then burn to CD or load onto portable media devices. Use the included
software download card to download and install the software. Then follow the on-screen
instructions.
To record music to your computer:
1. With EZ Vinyl/Tape Converter installed on your computer, use the included USB cable to
connect Pro200BT's USB port to an available USB port on your computer.
2. Make sure that Pro200BT is selected as the computer's default recording device. See
below for instructions specific to your computer's operating system.
3. On your computer, you can open EZ Vinyl/Tape Converter by going to Start Menu > All
Programs (Windows) or the Applications menu (macOS).
4. Follow the on-screen instructions to set up your recording. When prompted to play your
music, move Pro200BT's Tonearm over the record to start playback.
Note: To listen to a record while it's playing, listen through your computer's speakers (see
Playback), pair Pro200BT to a Bluetooth speaker (see
Speaker), or connect Pro200BT's RCA Output to a stereo system or powered speakers.
5. When you have finished recording, raise Pro200BT's Tonearm from the record and return
it to its Arm Clip.
Visit ionaudio.com/computer-optimization
for audio.
Setting Pro200BT as the Default Recording Device
Windows XP
Click Start Menu > Control Panel (or Settings > Control Panel in Classic View) > Sound and
Audio Devices. Click the Audio tab. Under Sound Recording, select Pro200BT as the
default device.
Windows Vista
Click Start Menu > Control Panel (or Settings > Control Panel in Classic View) > Hardware
and Sound > Sound. Click the Recording tab and select Pro200BT as the default device.
Windows 7/Windows 8/Windows 10
Click Start Menu > Control Panel > Sound. Click the Recording tab and select Pro200BT as
the default device.
macOS
Click the upper-left "apple" icon then click System Preferences > Sound. Click the Input tab.
From the menu, select Pro200BT as the device.
Pairing Pro200BT to a Bluetooth
for more information on optimizing your computer
7