en - Warning and Safety instructions
– Dust container / fine dust container: clean only with wa-
ter and a little mild washing-up liquid then dry thor-
oughly.
– Fine dust filter: do not clean the inside of the fine dust
filter. Rinse the outside under running cold water. Do not
use washing-up liquid. Do not use any sharp or pointed
objects and do not brush the fine dust filter. After clean-
ing, leave the fine dust filter to dry for a minimum of
24 hours before placing it back in the fine dust con-
tainer.
– Pre-filter / filter frame: rinse under running cold water.
Do not use washing-up liquid. Do not use any sharp or
pointed objects. Dry thoroughly after cleaning.
Correct use
Do not use the vacuum cleaner without the dust con-
tainer, pre-filter, fine dust container and fine dust filter fit-
ted.
Do not vacuum up anything which has been burning or
is still glowing e.g. cigarettes, ashes or coal, whether glow-
ing or apparently extinguished.
Do not use the vacuum cleaner to vacuum up any water,
liquid or damp dirt. Wait until any freshly cleaned or sham-
pooed rugs or carpets are completely dry before attempt-
ing to vacuum.
Do not use the vacuum cleaner to vacuum toner dust.
Toner, such as that used in printers and photocopiers, can
conduct electricity.
32