Télécharger Imprimer la page

Linea 2000 DOMO DO10160 Mode D'emploi page 51

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
CLEANING
·
Always remove the plug from the socket before cleaning the unit.
·
Never use any chemical or abrasive products to clean the unit.
Never clean the unit with water or any other liquid, this can cause electrocution.
·
When the power cord is damaged it must be repaired or replaced by the after sales surface of the
·
manufacturer or by a qualified person.
Air filter
Clean the air filter at least ever 2 weeks. To make sure the air
·
conditioning can operate in optimal conditions.
Clean the air filter in lukewarm water with a bit of detergent.
·
Rinse the filter thoroughly and let it dry.
Make sure the filter is completely dry before placing it back in to
·
the air conditioning.
Air conditioning body
Use a damp, soft cloth and a bit of mild detergent, to clean the
outside of the unit. Make sure the unit is thoroughly dried afterwards.
Storing
Before storing the unit for a longer period of time, please follow the next steps:
·
Drain all the water from the appliance.
·
Afterwards turn on the unit in the "fan" mode for half a day. Make sure the unit is placed in a heated
room. This will dry the unit completely and prevent the forming of mold.
Turn off the unit, remove the plug from the socket and remove the batteries from the remote control.
·
Clean the filters and place them back in the unit.
·
·
Store the unit in a dry, dark place.
POSSIBLE PROBLEMS AND THEIR SOLUTIONS
The appliance isn't working when pressing the on/off touch.
·
The error code P1 is displayed , drain the water from the air conditioning.
The room temperature is lower than the selected temperature. Adjust the selected temperature.
·
The room is not cool enough.
·
The windows and doors aren't closed. Make sure all windows and doors are closed.
·
There are heat sources in the room. Remove all heat sources if possible.
·
The air outlet hose is not connected or blocked. Attach the hose and check if there is no blockage.
The selected temperature is too high. Adjust the selected temperature.
·
The air filter is dirty. Clean the air filter.
·
The appliance is making too much noise or is causing vibrations.
The floor is not level or flat. Place the appliance on the flat and level surface if possible.
·
The air filter is dirty. Clean the air filter.
·
Your appliance makes a gurgling sound
·
The sound is produced by the refrigerant in your appliance, this is normal.
www.domo-elektro.be
51
DO10160

Publicité

loading