Linea 2000 DOMO DO10160 Mode D'emploi page 49

DRY
With this function you can dehumidify the room. Keep windows and doors closed for this function.
Press the MODE button until the DRY indicator lamp is on.
1.
You cannot set the ventilation speed in this setting.
2.
FAN
FAN SPEED display 1. Press the MODE button until the FAN indicator lamp is on.
Displays selected FAN SPEED:
2. Press the FAN button of the remote control to set the ventilation speed. There are three
HIGH, MED,
FAN SPEED display
or LOW
settings: LOW
Displays selected FAN SPEED:
This display is blank when
The temperature cannot be adjusted.
3.
HIGH, MED,
set to AUTO speed.
or LOW
This display is blank when
Timer on
set to AUTO speed.
With this function you can delay the start of the apparatus, up to maximum 24 hours.
1. Press the TIMER ON button on the remote control.
You can now read on the display of the remote control when the air conditioning will go on.
2.
3. Press the TIMER ON button several times to increase the time. Or keep the button pressed.
4. Once the desired time is set, you will see "Timer on" on the display of the remote control. Two
lights will light up on the control panel's display.
If you want to switch off the timer, press the TIMER ON button several times until the counter
5.
goes to "0". Or keep the button pressed.
Attention: pressing the ON/OFF button on the remote control will cancel all timers.
Timer off
With this function you can switch off the apparatus automatically after some time.
1. Press the TIMER OFF button on the remote control.
You can now read on the display of the remote control when the air conditioning will go off.
2.
3. Press the TIMER OFF button several times to increase the time. Or keep the button pressed.
Once the desired time is set, you will see "Timer off" on the display of the remote control. Two
4.
lights will light up on the control panel's display.
If you want to switch off the timer, press the TIMER OFF button several times until the counter
5.
goes to "0".
Attention: pressing the ON/OFF button on the remote control will cancel all timers.
Timer on + Timer off
You can also switch on both functions simultaneously. This determines when you switch on the apparatus,
but also when the apparatus switches off.
Please note: this time is always from the hour when you programme the setting. For example: it is now 1
pm. You want the apparatus to work from 4:30 to 6 pm. Set the TIMER ON on 3.5 h and TIMER OFF on 5.0
h.
Sleep
When pressing the "sleep" touch, the selected temperature will be elevated with 1 °C after 30 min. After
another 30 min the temperature will increase with another 1°C. The air conditioning will maintain this
temperature for 7 hours. After this time, the air conditioning will go back to the original set temperature
and the "sleep" function will end.
NOTE: this function cannot be selected with the "fan" or "dry" function.
www.domo-elektro.be
FAN SPEED display
FAN SPEED display
Displays selected FAN SPEED:
SILENT display
Not available for this unit
HIGH, Displays selected FAN SPEED:
SILENT display
or LOW
, HIGH
Not available for this unit
Temperature/Timer display
or LOW
This display is blank when Displays the set temperature by default, or timer setting
when using TIMER ON/OFF functions
set to AUTO speed. This display is blank when
Temperature/Timer display
Temperature range: 17-30 C(62 F-86 F) o
Displays the set temperature by default, or timer setting
set to AUTO speed.
Timer setting range: 0-24 hours
when using TIMER ON/OFF functions
This display is blank when operating in FAN mode.
Temperature range: 17-30 C(62 F-86 F) o
Timer setting range: 0-24 hours
5 5
This display is blank when operating in FAN mode.
5 5
Low battery
this unit
detection
Battery display
Low battery
SLEEP display
detection
Displays when
SLEEP function
SLEEP display
is activated
Displays when
FOLLOW ME
SLEEP function
is activated display
Indicates that
FOLLOW ME
the FOLLOW ME
display
function is on
Indicates that
the FOLLOW ME
Not available for
function is on
this unit
Not available for
this unit
MED,
HIGH, MED,
and AUTO.
Temperature/Timer display
Displays the set temperature by defa
O O
when using TIMER ON/OFF function
O O
This display is blank when operating
ION
SLEEP SWING
COOL operation
1. Press the MODE button to select
COOL operation
COOL mode.
2. Set your desired temperature using
SILENT display
1. Press the MODE button to select
the Temp or Temp
COOL mode.
3. Press the FAN button to select the
SILENT display
Not available for this unit
2. Set your desired temperature using
fan speed: AUTO, LOW, MED,or
Not available for this
the Temp or Temp
HIGH.
3. Press the FAN button to select the
4. Press the ON/OFF button to start th
fan speed: AUTO, LOW, MED,or
unit.
HIGH.
4. Press the ON/OFF button to start the
unit.
Temperature/Timer disp
Displays the set tempera
when using TIMER ON/O
Temperature range: 17-30 C(62 F
Temperature range: 17
Timer setting range: 0-24 hours
Timer setting range: 0
This display is blank whe
5 5
DO10160
FOLLOW
LED
ME
button.
button.
o O
5 5
49