Publicité
Les langues disponibles
Les langues disponibles
5.7 CONNECTION TO SYSTEMS
5.7.1 Electrical connection
Just connect the stove to the electrical system using
the plug provided.
The electrical connection (plug) must be easily
accessible even after installing the stove.
If the power cord is damaged, it must be replaced
by the technical assistance service or by a qualifi ed
technician in order to prevent any risk.
5.7.1.1 Earthing
The system must be earthed and equipped with a
diff erential switch in accordance with legislation in force
(fi g. 5.11).
Make sure the power cord does not come into contact
with hot parts.
The fl ue gas exhaust pipe must have its own earth
connection.
5.8 OPTIMISATION OF COMBUSTION
Excellent fuel depends on diff erent factors (type of
installation, operating and maintenance conditions,
type of pellets, etc.)
When fi rst switched on, the stove combustion can be
optimised.
Generally speaking, if at the end of combustion,
there is a lot of residue in the burn pot, you should
change the combustion confi guration (by increasing
the value) until you fi nd the best solution.
See sections 9.17- 9.18 - 9.19.
5.9 VENTILATION
The stove is equipped with ventilation.
The air pushed by the fans keeps the appliance at
a low enough temperature, thus avoiding excessive
stress on the materials of which it is composed.
Do not close the hot air outlet vents with any objects
or the stove will overheat!
The stove is not suitable for cooking food.
ATTENTION: Do not cover the air vents.
14
08/2021 - EN
Product images are purely indicative
Fig. 5.10
Publicité
