Samsung FlexWash WV60M9900AV Mode D'emploi page 50

Operations
Simple steps to start
1. Press POWER on the control panel of a desired washer (upper/lower) to turn the
washer on.
2. Put laundry into the washer.
3. Select a cycle.
4. Change the cycle settings (temperature and/or soil level) as appropriate to the laundry.
5. Select cycle options as needed.
6. Press and hold START/PAUSE.
To change the cycle during operation
1. Press START/PAUSE to stop operations temporarily.
2. Select a different cycle.
3. Press and hold START/PAUSE again to start the new cycle.
WARNING
• Do not put anything on top of your washer while it is running.
• While the lower washer is operating, the protective cover may have wet steam due to
the temperature difference between the upper and lower parts of the washer.
50 English
FlexWash_WV9900M_DC68-03768A-04_EN.indd 50
01 06
03
01
06
03
CAUTION
When using the upper washer, you may
not see all the remaining clothes after a
cycle is finished, especially those in the
front area of the tub.
When the cycle is complete, turn the tub
manually to check if there are any clothes
remaining in the tub.
04 05
05
04
2017-05-22 7:03:34