Samsung FlexWash WV60M9900AV Mode D'emploi page 46

Operations
07 Spin
08 Soil
09 Pre Soak
46 English
FlexWash_WV9900M_DC68-03768A-04_EN.indd 46
• Extra High: Extends the spinning process to effectively remove
moisture from the load. Extra High uses a stronger spinning
process to remove moisture, so it is not suitable for wrinklefree
or non-iron fabrics, or overloads.
• High: Underwear, t-shirts, jeans, and sturdy cottons.
• Medium: Jeans, wrinkle-free or wash-and-wear items and
synthetics.
• Low: Delicate items that require a lower spinning speed.
• No Spin: The drum does not spin after the final drain process.
• Rinse Hold (No lamp turns on): The final rinse process is
suspended so that the laundry remains in the water. To unload
the laundry, run a drain or spin process.
NOTE
* Spin Only: This cycle runs a spin cycle only. Press and hold Spin
for 3 seconds. With the cycle time on the display, press Spin
repeatedly until a desired spinning speed is selected. Then, press
and hold START/PAUSE to start the cycle.
Press the button to select the soil level/washing time.
• Extra Heavy: For extremely soiled loads.
• Heavy: For heavily soiled loads.
• Normal: For moderately soiled loads. This setting is best for
• most loads.
• Light: For lightly soiled loads.
• Extra Light: For barely soiled loads.
This adds 30 minutes of soaking time at the start of the wash
cycle for better stain removal.
2017-05-22 7:03:34