FLUX FMC 100 Notice D'instructions page 25

Attention!
> If the material of the flow meter is not resistant to the liquid
to be transferred, it must not be used.
> Observe the chemical resistance and internal operating
instructions.
Note!
Check if the materials of the flow meter are appropriate for the
applications.
Note!
Generally replace a defect signalling cable.
Regularly check the flow meter for function.
Warning!
When non-approved spare-parts are used persons can be hurt
and the machine / equipment can be damaged.
> Only use spare and wear parts that are approved by the
manufacturer.
> Depressurise the system.
> Separate pump from current.
> Empty hose, flow meter and valves.
> Always replace defective parts.
> Only use genuine spare parts
Operating instructions FMC 25 / 60