Publicité
Les langues disponibles
Les langues disponibles
VELOMANN PLUTONIUM CARBON REAR WHEEL
SPRINT
The E-Oltre product is assembled with Velomann Plutonium 622 x 21C ETRTO wheels, rim profile in H50mm carbon.
The rear Velomann Plutonium wheel is assembled with a specific hub motor manufactured by Mahle, the X30 model.
The wheels are manufactured in accordance with ETRTO dimensional standards.
The maximum allowable tire pressure is the lower number specified on the tire and specified on the rim.
The rear hub motor is only compatible with a 6-bolt M5x8mm disc brake rotor.
The front hub is compatible with center-lock disc brake rotors.
INFORMATION!
The Wheels have been checked according to the Manufacturer's quality standard and tested in accordance with the industry standard
UNI EN 4210-7.
t
S
echnIcal
pecIfIcatIonS
---------------------------------------------------------------------------------------------------------------------------------------------------------------
- AXLE
- SPROCKET PACK BODY
---------------------------------------------------------------------------------------------------------------------------------------------------------------
* I componenti saranno disponibili solo in kit
TIRES
Velomann Plutonium wheels are compatible for mounting inner tube and/or tubeless tires.
The wheels are originally equipped with Tubeless Ready sealing tape. To use tubeless tires, a tubeless conversion kit with sealant
liquid must be used. When using tires with an inner tube, it is possible to use an anti-vibration adhesive to be applied to the inner tube
valve hole.
WARNING!
Before installing the inner tube, make sure that the Tubeless Ready sealing tape is not worn or damaged. Worn or damaged Tubeless
Ready sealing tape can cause a sudden loss of tire pressure.
WARNING!
The functionality of the Tubeless Ready System is dependent on the tires and sealant. There is no warranty for the functionality of this
system. sure.
WARNING!
Danger of rim damage if unsuitable sealant is used. Never use sealant containing alkaline substances (ammonia, sodium hydroxide).
rear Ø12 x 100 mm / M12 - 9.85 mm x 136.5 mm
Shimano HG-11 / SRAM XDR (available from the supplier Mahle)
WARNING!
Do not use metal tire levers. They can damage the carbon rim,
the tire, and even the inner tube. It is recommended to use
hard resin tire levers.
Publicité
