Publicité
Les langues disponibles
Les langues disponibles
The height of this type of handlebar stem can be adjusted by a specialist retailer. Due to the importance and complexity of this compo-
nent, please consult your retailer for stem adjustment and to fully understand the mechanisms and adjustment methods.
DANGER!
Always comply with the torque values specified on the handlebar stem. Incorrect tightening may cause the component to malfunction
or break, causing the rider to lose control and fall!
Never use this product with incomplete or incorrect assembly. This endangers not only the rider but also other road users.
WARNING!
Turn the handlebar left and right. Do not use the bike if there is any evidence of abnormal steering (play in the steering or uneven
resistance) or if any cracks or signs of damage are evident.
In the event of an accident or fall, the handlebar will almost certainly be involved and will be subjected to high levels of stress and
impact. In the event of any deep scratches or cracks, replace the components.
WARNING!
If the handlebar is damaged, stop using the E-Oltre bike immediately. Do not use the E-Oltre bike until a specialist retailer has con-
ducted a full inspection and, if necessary, the handlebar has been replaced.
The gear/brake control levers are mounted on the handlebar using a clamp integrated into the lever.
Pay close attention to the recommended positioning of the levers and respect the positioning of the high grip zone. Consult the lever
product handbook for the correct torque. To preserve the integrity of the handlebar bend, do not exceed the maximum torque of 10 Nm.
b
IKe computer holder for Integrated carbon handlebar
The integrated handlebar provided is compatible with bike computer holders
that are attached to the handlebar using two M5 screws.
Tighten the screws to the recommended torque of 2/3 Nm, as indicated on the handlebar.
Always use the safety strap supplied with the bike computer to fasten it to the handlebar.
WARNING!
Check that the mount is installed correctly before using the bike computer.
.
Publicité
