Atlas Copco ETPSTR61-50-13-COT Mode D'emploi page 5

ETPSTR61-50-13-COT
Torque range
Square drive
Weight
Weight
Height
Motor power
Motor voltage
Motor voltage type
Service intervals
Service recommendations
Overhaul and preventive maintenance is recommended at regular intervals. See
the Preventive maintenance section for detailed information regarding over-
haul of your tool and specific parts. If the machine is not working properly, it
should immediately be taken away for inspection. At the overhauls, all parts
should be cleaned accurately and defective or worn parts should be replaced.
EN
7.4–40.6 ft lb
N/A in
2.1 kg
4.63 lb
N/A mm
1500 W
200 V
3 a.c.
© Atlas Copco Industrial Technique AB - 9836 800000 00
Product information
5