Makita LM003J Manuel D'instructions page 9

Attaching the mulching plug
1. Open the rear cover, and then remove the grass
basket.
Fig.13
► 1. Rear cover 2. Grass basket
2.
Attach the mulching plug by pushing it as far as it
will go so that the protrusions on the mulching plug fit
into the holes on the machine.
Fig.14
► 1. Mulching plug 2. Protrusion
Installing or removing the discharge
chute
To install the discharge chute, follow the steps below.
1.
1
basket and mulching plug.
2.
protrusions on the mower body as shown in the figure.
2
1
Fig.15
► 1. Discharge chute 2. Protrusion
To remove the discharge chute, open the rear cover,
and then remove the discharge chute.
FUNCTIONAL
DESCRIPTION
2 Installing or removing battery
cartridge
CAUTION:
before installing or removing of the battery
cartridge.
CAUTION:
cartridge firmly when installing or removing bat-
tery cartridge. Failure to hold the machine and the
battery cartridge firmly may cause them to slip off
your hands and result in damage to the machine and
battery cartridge and a personal injury.
CAUTION:
cover before use. Otherwise, mud, dirt, or water may
cause damage to the product or the battery cartridge.
CAUTION:
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
CAUTION:
installing or removing the battery cartridge.
9 ENGLISH
Open the rear cover, and then remove the grass
Hook the holes on the discharge chute to the
2
Always switch off the machine
Hold the machine and the battery
Make sure that you lock the battery
Do not install the battery cartridge
Hold the battery cover firmly when
1