Publicité
Les langues disponibles
Les langues disponibles
To install the battery cartridge;
1.
Pull up the locking lever, and then open the battery
cover.
Fig.16
► 1. Battery cover 2. Locking lever
2.
Hold the battery cartridge in the upright position
with the indicator lamps facing forward. Insert the bat-
tery cartridge into the machine until it is latched with the
battery lock lever.
1
Fig.17
► 1. Indicator lamps 2. Battery lock lever
NOTE: Pushing the battery vertically from above
makes the machine harder to move and makes it
easier to install the battery.
1
2
Fig.18
3.
Close the battery cover and push it until it is
latched with the locking lever.
To remove the battery cartridge;
1.
Pull up the locking lever and open the battery
cover.
2.
Push the battery lock lever, and then pull out the
battery cartridge from the machine.
2
Fig.19
► 1. Battery lock lever 2. Battery cartridge
3.
Close the battery cover.
Machine / battery protection system
The machine is equipped with a machine/battery
protection system. This system automatically cuts off
power to the motor to extend machine and battery life.
The machine will automatically stop during operation if
the machine or battery is placed under one of the fol-
lowing conditions:
Overload protection
When the machine or battery is operated in a manner
that causes it to draw an abnormally high current,
the machine automatically stops and the main power
lamp blinks in green. In this situation, turn the machine
off and stop the application that caused the machine
to become overloaded. Then turn the machine on to
restart.
10 ENGLISH
1
2
Publicité
