Pressalit MSCT 1 Manuel D'utilisation Et D'entretien page 30

Cleaning
Remove the battery before cleaning the shower change trolley.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
To see which cleaning products have been tested and approved by Pressalit
for the specific product, please visit Pressalit.com and refer to the product's
item number. Pressalit recommends cleaning the product after installation.
Always read the material safety data sheet (MSDS) and supplied
instructions of the cleaning, disinfecting or de-scaling agent and comply
en
with instructions for safe use, dilution, rinsing, drying, handling and
storage of the agent.
• Do not use an autoclave or other type of steam cleaner.
• Avoid aggressive cleaning agents containing acids.
• Never spray the product directly with a high pressure cleaner.
• For surface disinfection, chlorine-based disinfectants may be used
according to the product specification and safety precautions for these
products .
Do not perform any type of cleaning or disinfection of the shower change
trolley while the patient is lying on it.
30
CAUTION
!
IMPORTANT
CAUTION
!