VOOL Load Management Controller Guide Rapide page 12

7.2.1
CAN
Scenario 3: The Charger(s) and the LMC are connected via CAN.
The LMC is connected to the Internet via an Ethernet cable.
The last Charger on the line should be equipped with an end resistor
to provide reliable communication between the devices.
7.2.2
CAN
Scenario 4: The Charger(s) and the LMC are connected via CAN.
All the devices are connected to the Internet via Wifi or 4G. The last Charger
on the line should be equipped with an end resistor to provide reliable
communication between the devices.
CAN
WiFi/4G
CAN
End resistor
WiFi/4G
End resistor
VOOL App Basic
setup
VOOL App Basic
setup