VOOL Load Management Controller Guide Rapide page 10

6. Connect AC Power Supply
6.1 (Three-Phase) Connect Cables to the Designated Socket and
Socket to LMC
Switch on the LMC and ensure
that top and bottom LED light up
If any LEDs are unlit or red, refer
to the troubleshooting section.
PE N L3 L2 L1
6.2 (Single-Phase) Connect Cables to the Designated Socket and
Socket to LMC
Switch on the LMC and ensure
that top and bottom LED light up
If any LEDs are unlit or red, refer
to the troubleshooting section.
PE N L1