Continental Fireplaces Builder CB42NTRE Manuel D'installation Et D'utilisation page 51

10.4 minimum mantel clearances
WARNING
!
• Risk of fi re. Maintain all specifi ed air space clearances to combustibles. Failure to comply with these instructions
may cause a fi re or cause the appliance to overheat. Ensure all clearances (i.e. back, side, top, vent, mantel,
front, etc.) are clearly maintained.
• When using paint or lacquer to fi nish the mantel, the paint or lacquer must be heat resistant to prevent
discolouration.
Combustible mantel clearance can vary according to the mantel depth. Use the graph to help evaluate the
clearance needed. These same requirements apply to any combustibles protruding on either side of the appliance.
12" (30.5cm)
M H
10" (254mm)
A E
8" (203.2mm)
N I
T G
6" (152.4mm)
E H
4" (101.6mm)
L T
2" (50.8mm)
0
2 4 6 8 10 12
MANTEL DEPTH (INCHES)
finishing
45.4
TOP OF
APPLIANCE
34 5/8"
[88cm]
W415-2368 / C / 01.20.21
EN
51