Publicité
Les langues disponibles
Les langues disponibles
2
Power outlet orientation
1.
Re-install the Power outlet (C) in the desired location of the Locker (A).
2.
The power outlet (C) can be installed on the left or right hand side of the Locker (A), either facing to the inside or
outside orientation.
C
3.
If needed, add the blank plate (E) to the outside of the Locker (A) using the 6 Phillips head screws to cover the power
outlet opening.
E
3
Attaching the casters
1. Be sure the door is locked and lay the Locker (A) down.
Use packaging material to protect the nish.
2.
Attach the swivel casters (B) to the outer side of the Locker (A),
by inserting insert bolts (AA) and washer (BB) through the swivel
caster (B). Use the Hex Key (LL) to tighten the 8 bolts (AA) to the
bottom frame.
Note: If assembling Locker (A) to the left side of the Workbench,
then casters will mount to the left side.
If assembling Locker (A) to the right side of the Workbench,
then casters will mount to the right side.
A
C
BB
AA
8
E
B
A
A
Publicité
