Publicité
Les langues disponibles
Les langues disponibles
FAULTS
Problem
Alarm key and/or
temperature
display flashing.
Door does not
open easily.
Some or all of the
LED lighting does
not work.
Appliance makes a
noise.
'LL' code shown in
the display.
'PF' code shown in
the display.
Error code E0
shown in the
display.
EN 36
Cause/Solution
• The door has been opened for too long or too frequently.
• The door does not seal properly (the seal is dirty, the door is
misaligned or the seal is damaged, etc.).
• Too much fresh food has been put in at the same time.
You are trying to open the appliance's door just after you have closed
the door. Then opening the door is difficult. When you open the door,
cold air escapes from the appliance and is replaced by warm air from the
surroundings. As this air cools a slight vacuum is created that makes it
more difficult to open the door. The situation returns to normal after a few
minutes, and the door opens easily again.
• Consult a service technician about LED lighting that is not working. For
safety reasons, you are not allowed to repair LED lighting yourself.
• This product contains a light source of energy efficiency class E.
• The appliance is cooled by a refrigeration system with a compressor
(and with some models, also a fan) that makes a noise. The noise leve
depends on the installation of the appliance, its correct use and its
age.
• When you connect the appliance to the power supply the noise made
by the compressor or flowing refrigerant may be slightly louder. This is
not indicative of a defect, and has no effect on the service life of the
appliance. The appliance will make less noise after a while.
• The appliance may be temporarily noisier after the door has been
opened for too long or too frequently, a large quantity of fresh food has
been put in the appliance or the intensive freezing or intensive cooling
function has been activated.
Child lock has been activated. See the chapter 'Child Lock'.
Lengthy power failure. See the chapter 'Power failure alarm'.
The touch keys do not respond. Call the service centre to make an
appointment for repair work. The appliance operates in the safe mode
until it has been repaired. The appliance automatically retains the most
suitable temperature for each compartment.
Publicité
