LENCO DVD-120BK Manuel D'utilisation page 10

USB PORT
Connecting a USB stick
Connect a USB stick to the USB Port.
Accessing the Content on a USB Drive
1. Press the DVD/USB button to enter DVD/USB mode.
2. The DVD player will index your USB stick and display potential compatible files to playback
3. Use the Up/Down arrow on the remote to highlight your file and press OK to playback
Technical Specification
Signal system: PAL/AUTO/NTSC
Laser: Semiconductor laser, wavelength 650nm
Frequency Response: 20Hz-20KHz (at 1KHz 0 dB)
Signal-to Noisy Ratio (Audio): >= 90 dB (at 1KHz 0 dB)
Audio Distortion + Noise: <= - 60dB (at 1KHz 0 dB)
Audio Output (Analog audio): 2.0 ±1.0 Vrms
Video Output: Composite: 1.0 +/- 0.2Vp-p
Load impedance: 75 ohm, imbalance, negative polarity
Power Supply: 100-240V, 50/60Hz
Product dimension: 225 x 228 x 53mm (WxDxH)
Product Weight: 980 gr.
10