FUXTEC FX-E2RM46 Manuel D'utilisation page 29

Original user manual FUXTEC 40V battery lawn mower FX-E2RM46_rev01
Figure 2: Charger and rechargeable battery (dual charger as shown on the
the right is included)
9. Battery
10. Battery level indicator
11. Push button to display the charging capacity
12. Locking button (locks in place when inserted into charger or mower)
13. Control lights (in the right picture point 4)
14. Charger
Assembly
Positioning the lower rail
1. attach the lower handlebar to the mower using the wing screws.
2. then attach the upper handlebar to the lower handlebar using the quick-release clamps.
3. use the cable clamps to guide the cable close to the handlebar so that it does not get
caught anywhere and is not damaged.
4. 4. see the following illustration
To ensure that the quick release closes tightly, you can change the position on
the thread by turning it anti-clockwise or clockwise until the correct position
Note:
for a tight closure is found.
29