Philips Senseo HD6570 Mode D'emploi page 26

English
26
2
1
1 l
3 Pour half a bottle of descaling liquid into the water reservoir and fill it up
with fresh tap water.
4 Tilt the water reservoir and place the bottom back onto the machine (1).
Then press the top of the water reservoir towards the machine (2).
5 Press the on/off button. The on/off button flashes slowly while the water
heats up. The machine is ready for descaling when the on/off button
lights up continuously.
6 Put a bowl with a capacity of at least 1 liter under the spout to collect the
descaling mixture.
7 The machine is ready for descaling when the on/off button and CALC
button light up continuously. Press the CALC button until the machine
beeps twice to start the descaling cycle.
8 When the descaling cycle is in progress, the descaling solution comes out
of the machine at intervals. During the last 5 minutes, the descaling
solution flows continuously.
Warning: Do not interrupt the descaling cycle.
9 When all the descaling solution in the water reservoir has been used up
after approximately 45 minutes, the on/off button flashes quickly and the
CALC button flashes slowly.
10 Empty the bowl and place it back under the spout.