BWT VI-HC 135 Mode D'emploi page 14

FOR INSTALLERS AND PROFESSIONALS
2.2.Installation instruction
2.2.1. Water pipes connection and distance sketch
To avoid air recirculation, the heat pump should be installed in a place with good ventilation or
should reserve sufficient space for installation and maintenance. Please refer to the schema below:
A distance at least 500 mm is required between the heat pump and the walls, shrubs, equipment, etc.
This will provide sufficient intake air. In order to prevent air recirculation, the gap of air outlet should
not be less than 1000 mm. We do not recommend placing the unit under the eaves, deck or porch as
this will result in recirculation of the exhaust air or low efficiency of the heater, even seize.
* MINIMUM DISTANCE
Filter
Water processor
Water switch
2019/11– C - Code : 33240
14 /76