ADE CK 1603 Mode D'emploi page 19

Cleaning
NOTE on material damage
− Do not immerse the clock in water or other liquids.
− Never use harsh or abrasive cleaning agents or the like to clean the
clock. If you do, the surface could be scratched.
− Dust the clock if necessary with a soft, dry cloth. The glass can also be cleaned with
commercially available glass cleaners.
Fault/Remedy
Fault
No function
No radio signal reception
The indicated time is obviously
incorrect
Technical Data
Model:
Battery:
Rated current:
Distributor (no service address):
Our products are constantly being developed and improved.
For this reason, design and technical modifications are possible at any time.
Radio Wall Clock CK 1603
Possible Cause
‚ Is the battery empty or has it been inserted
incorrectly?
‚ See "Tips for good reception". Set the time
manually, as needed.
‚ Check whether devices with very strong
magnetic fields are located in immediate
proximity to the clock (e.g. TV set). Remove
such devices or choose a different location
for the clock.
‚ Start the radio signal transmission again.
Radio Wall Clock CK 1603
1x LR6 (AA), 1,5 V
3 mA
Waagen-Schmitt GmbH
Hammer Steindamm 27-29
22089 Hamburg, Germany
Cleaning
19