Amy Scene Player io
2.5.2.Wall mounting with circular back cover
2.5.2.1. Using double-sided tapes
NOTICE
The product is designed to be fixed to most wall surfaces, such as paint, wallpaper, earthenware, wood, varnished
wood, primer/coating. However the walls must be flat and clean.
1] Remove the protective films from the double-sided tapes.
2] Take the provided circular back cover and stick the double-sided tapes on its
back.
3] Remove the second protective films from the double-sided tapes already
sticked.
4] Following the orientation indicated inside the circular back cover, press it on a
flat, clean, and dry surface. Make sure it is firmly fastened to the surface.
NOTICE
Make sure Amy Scene Player io is switched on before clipping the module (refer
to Switching on Amy Scene Player io).
5] Clip the Amy Scene Player io module onto the circular back cover. Press firmly
on the front of the module, on the right and left near the my button as close
as possible to the translucent circle without pressing on the edges of the
module (to avoid unwanted radio transmission), until it clicks into place.
2.5.2.2. Using screws
CAUTION
• Do not use an electric screwdriver.
• The order of assembly must be followed to ensure that the parts fit together correctly and don't get damaged.
1] Drill 2 horizontal holes through the indicated drill marks on each side inside
the circular back cover.
2] Fix the circular back cover using screws appropriate for hole size and wall
type, following the orientation indicated inside the circular back cover.
NOTICE
Make sure Amy Scene Player io is switched on before clipping the module (refer
to Switching on Amy Scene Player io).
3] Clip the Amy Scene Player io module onto the circular back cover. Press firmly
on the front of the module, on the right and left near the my button as close
as possible to the translucent circle without pressing on the edges of the
module (to avoid unwanted radio transmission), until it clicks into place.
2.6.Use as a remote control
NOTICE
Amy Scene Player io can be used as a remote control without being wall-mounted. However, care must be taken to
ensure that the circular back cover is securely attached to Amy Scene Player io module to protect the back access
from any risk of damage and avoid accidental activation.
©
Copyright
2024 SOMFY ACTIVITES SA. All rights reserved.
1]
2]
Designed in France
3]
Designed in France
Designed in France
4]
5]
1]
2]
3]
EN
Designed in France
9