SOMFY Amy Scene Player io Notice page 6

Les langues disponibles

2.2.1.Adding/Deleting Amy Scene Player io in TaHoma

NOTICE

It is advisable to do next steps with front panel buttons deactivated to avoid sending unwanted commands by

manipulating the module (refer to Switching on Amy Scene Player io).

To add or delete Amy Scene Player io in TaHoma, you need to access and use a TaHoma switch and TaHoma

application: you must have a compatible phone or mobile device.

The application is downloadable for free from Apple Store platforms and Google Play Store on the following mobile

devices:

▪ Apple iPhone

mobile phone or mobile device with iOS operating system running iOS and later.

▪ Mobile phone or mobile device with operating system Android

The software version of the TaHoma application may be updated from time to time to add new features and services.

To add or delete Amy Scene Player io in TaHoma, follow the instructions in TaHoma application.

2.2.2.Configuring the scene launcher in TaHoma

The scene launcher must be configured in TaHoma application:

▪ Assign one scene to Scene launch button 1 and another scene to Scene launch button 2, either by choosing

scenes already created in TaHoma application, or by creating new specific scenes.

To configure the scene launcher in TaHoma, follow the instructions in TaHoma application.

2.3.Switching on Amy Scene Player io

1] To activate the front panel buttons, long press the On/Off button until the

settings feedback LED lights up green. It switches from Off status to On

status.

2] To deactivate the front panel buttons, long press the On/Off button until the

settings feedback LED lights up red: this indicates the Off status.

NOTICE

The PROG button and the mode selector are always active, even when the front panel buttons are deactivated by the

On/Off button.

™

OS and later.

Amy Scene Player io

>2 s