Publicité
MAKE SURE TO FOLLOW THE STEPS BELOW
FOR A SUCCESSFUL & EASY ASSEMBLY
TIP: To ensure the final unit is secure and sturdy it is highly
recommended to secure each component with the zip ties provided
after connecting each component together in the steps.
TO ASSEMBLE:
1. Remove all components from the box and lay flat on the floor.
2. Connect the Upper body (A) and the Lower body(B) by inserting the
metal posts into the corresponding metal cylinders. (FIG.A STEP 1)
3. Connect the Hat (C) to the Upper body (A) by inserting the metal posts
from the Hat (C) into the corresponding metal cylinders.(FIG.A STEP 2)
4. Connect the Arm (D) to the Upper body (A) by inserting the metal posts
from the Arm (D) into the corresponding metal cylinders.(FIG.A STEP 3)
5. Connect the Scarf (F) to the Upper body (A) by inserting the metal posts
from the Scarf (F) into the corresponding metal cylinders.(FIG.A STEP 4)
6. Connect the Redbird (E) to the Hat (C) by inserting the metal posts from
the Redbird (E) into the corresponding metal cylinders.(FIG.A STEP 5)
Fig. A
7. Secure the installing points with Plastic Ties (G) and secure the base to
the soft ground by fully inserting the Ground Stakes (H) into the ground.
8. Plug the light set into a power outlet.
SAVE THESE INSTRUCTIONS
06
Fig. B
DE
A x1
B x1
Oberkörper
Unterkörper
D x2
Arm
F x1
G x8
Schal
Plastikkabelbinder
C x1
Hut
E x1
Roter Vogel
H x4
Erdspieße
07
Publicité
