Active Era AB-Q2 Mode D'emploi page 8

Deflation
1. Open the cover at the side of the air bed
where the power cord is stored.
2. Make sure the manual inflation valve is closed.
3. Plug the power cord into an electrical outlet.
4. Turn the control dial anti-clockwise until the
arrow points to DEFLATE (Image 3).
5. The air bed will take up to 3-4 minutes to
deflate.
6. When the air bed is fully deflated, turn the
control dial one click clockwise until the arrow
points to OFF.
7. Unplug the cord and store in the power cord
compartment.
Folding Instructions
1. Lay the carry bag at the end of the mattress by the deflation valve (ensure the
deflation valve is open). The carry bag will serve as a rough measuring tool for
folding the air bed.
2. Fold the air bed into thirds that are narrower than the width of the carry bag.
3. Roll the mattress carefully, reclose the deflation valve and store in the carry bag.
8 of 36 | English
1 2 3