Pioneer GM-3300T Mode D'emploi page 9

Connecting the Speaker Output
Terminals
1. Expose the end of the speaker wires
using nippers or a cutter by about
10 mm and twist.
2. Attach lugs to speaker wire ends.
Lugs not supplied.
• Use pliers, etc., to crimp lugs to wires.
3. Connect the speaker wires to the
speaker output terminals.
• Fix the speaker wires securely with the termi-
nal screws.
Terminal screw
Speaker
output
terminal
Speaker wire
All manuals and user guides at all-guides.com
Twist
10 mm
Lug
Speaker wire
Using the Speaker Input
Connect the car stereo speaker output
wires to the amplifiers using the supplied
speaker input connector.
• Do not connect both the RCA input and the
speaker input at the same time.
7 Connections when using the speaker
input
Car Stereo
White/black:
Left ≠
White:
Left +
Speaker input connector
To speaker input terminal of
this unit.
Speaker output
Gray/black:
Right ≠
Gray:
Right +
8