Stanley DUBUIS BCE035C Manuel D'utilisation page 14

English
Nut
Unscrew the nut with 11mm open-end wrench
and a 15mm open-end wrench for the axis.
Blade axis
Remove the circlips with circlips pliers and then
remove the blades axis
Blade
guide
Unscrew the 2 screws of the blade guide with
2.5mm hexagonal key.
Put the blade guide on the new blade.
0715 - BCE035C - 14 KW Hydraulik GmbH – 96515 Sonneberg – Germany – www.kw-hydraulik.de
CHANGE THE BLADES
Axis
Circlips
Grease
Guide screws
Screw
Reassemble in the reverse order to dismantling.
Glue the screws with LOCTITE 243.
Grease the 3 axis.
Screw the nut to maximum in order to close the blades without
forcing.
MAKE SURE THAT THE BLADE IS IN THE RIGHT WAY
ROUND
Move the blades in order to appear blades axis.
Blades
Remove the blades réf.78431.
Blade axis
Nut Grease