Stanley DUBUIS BCE035C Manuel D'utilisation page 13

USING THE TOOL
Slide the battery all the way into the
tool until lock clicks.
Push on the trigger to move forward the blade to the cable. Check that the cable is in the correct cutting position, and
then push on the trigger, so the blades move regularly till the complete cutting of cable.
Continue to press the trigger up to automatic return of the blade. Release the trigger. The motor stops.
An audible "click" advises the release of the safety valve, at the maximum pressure force, securing the tool from over-
compression due to a too high cutting effort.
CAUTION: PLEASE, DO NOT PUT YOUR FINGERS BETWEEN BLADES. RISK OF GRAVE CUTS.
PERFORM OTHER CUTTINGS IN THE SAME WAY.
0715 - BCE035C - 13 KW Hydraulik GmbH – 96515 Sonneberg – Germany – www.kw-hydraulik.de
Release the trigger. The motor stops. Press the manual release trigger.
DO NOT USE THIS TOOL ON LIVE CAB
If necessary, press the manual release trigger.
Slide the cable through the tool head
or
English