Publicité
Les langues disponibles
Les langues disponibles
the temperature indicator for the refrigerator com-
partment. The warning symbol will turn off when
the temperature reaches +1°C.
Open door alert
When the refrigerator door is open, the sym-
bol lights up and the refrigerator compartment
temperature display shows "d". If the door remains
open for longer than 3 minutes an acoustic
warning signal sounds (in selected models). The
symbol will turn off when the refrigerator door is
closed. This indicator does not apply to the freezer
compartment door.
Child Lock
Touch the
symbols for both refrigerator and
freezer compartments simultaneously to activate
the Child Lock. Child Lock activation is confirmed
with symbol illuminated on the display. When the
Child Lock is active, all touch control sensors are
inactive. Only the combination of touch sensors for
activating / deactivating the Child Lock is active.
Touch the
sensors for both compartments simul-
taneously to deactivate the function. In addition, it
is recommended to use this function when clean-
ing the external surface of the door.
Set the temperature in the refrigerator com-
partment
Touch the
and
sensors to adjust the tempera-
ture in the range of 2°C to 9°C. Touch the
bol to decrease the temperature in the refrigerator,
or touch the
symbol to increase the temperature
in the refrigerator.
Set the temperature in the freezer compartment
Touch the
and
sensors to adjust the tempera-
ture in the range of -16°C to -24°C. Touch the
symbol to decrease the temperature in the freezer,
or touch the
symbol to increase the temperature
in the freezer.
Refrigerator compartment display and freezer
compartment display.
The displays indicate the set temperature or a
symbol / value for the individual fridge-freezer
functions. The displays do not show the actual
temperature inside the compartments but only
temperature set by the user.
Error Codes
The fridge-freezer equipped with a display on the
door may indicate a fault. Except for the previously
mentioned symbols specified in the appliance
control description, one of the following symbols
may appear on the display: EE, ER, F, FF. If one
of these symbols is displayed, contact manufac-
turer's authorized service centre. Contacting the
service is also recommended when the "H1" or
"L" symbols are flashing continuously for 24 hours
(when symbols cannot be turned off manually by
touching the 10 or 11 touch sensors).
OPERATION AND FUNCTIONS
sym-
70
Publicité
