Frigidaire PROFESSIONAL Serie Mode D'emploi page 6

PREPARE THE HOOD
(NON-DUCTED HOODS ONL Y)
Purchase a Non-ducted recirculation KiT from your dealer (Model
DFKTPCSOEC).
1. Insert the non-ducted recirculation plenum through the support frame openings.
Fig. 8.
2. Through the support frame openings fit the duct connector to the plenum locking
it with a turning movement. Fig. 9.
3. Fix a 5" duct to the duct connector of the non-ducted recirculation plenum. Fig.9.
4. Mount the 6'75" adapter above hood. Fig. 10.
(DUCTED HOODS ONLY)
Mount the discharge collar above the hood. Fig. 11.
DUCT
CONNECTOR
5"DUCT
NON-DUO'rED
RECIRCULATION
PLENUM
ADAPTER
: !
_/_ ISCHARGE
COLLAR
CONNECT DECORATIVE FLUE
1. Secure the upper flue to the upper support frame with the mounting screws
(2.9x9.5mm).
2. Insert the lower flue moving it completely towards the top and fix it temporarily
with retaining screw (3.9x9.5mm).
MOUNTING SCREWS
(2.9xg.Smrn) _
RETAINING
SCREW
(3.9x£.5mm)
-6-