Alecto BC-50 Mode D'emploi page 20

USAGE
Pressing buttons:
To prevent unwanted power-on or power-off, the buttons must be pressed fi rmly. You will
feel a click when a button is pressed correctly..
Power on:
1. Press and hold button on / off for about 1 second. All segments in the LCD light.
2. As soon as
Weighing:
1. Power-on the scale as described previously.
2. Put the baby in the centre of the scale.
3. As soon as the scale fi nished measuring, [ HOLD ] lights and the LCD fl ashes 3x. The
read-out is now put on hold.
4. Press button HOLD to make a new measurement.
0-set:
If a towel is put on the scale and the display show its weight, press the 0-set button again
to reset the display to
Power-off:
Press the on / off key momentairiy to power-off the scale.
To safe batteries, the scale will switch-off automatically after about 30 seconds of no use.
Memory:
The last measured weight is automatically stored in memory. As soon as the scale is
switched-on, the LCD fi rst shows the last measured weight for a couple of seconds.
Measuring in Kg or Lb:
You can set the BC-50 to measure in Kilograms (kg) or in pounds (lb). The selected unit is
displayed on the upper side in the display.
1. Power-on the scale by pressing button on / off for about 1 second.
2. As soon as all segments light, release the button but directly press is once more,
shortly.
3. The read-out has now changed from Kg into Lb or from Lb into Kg.
GB
kg lights, the scale is ready for use.
kg.
20