Alecto BC-50 Mode D'emploi page 19

INTRODUCTION
The Alecto BC-50 baby scale helps you to quickly and save measure the weight of your
baby. You might also use the BC-50 to measure the weight of your baby before and after
feeding her, determining how many food the baby has taken. When your baby has grown
up, you can remove the tray and install the platform, Now the BC-50 can be used as a
regulare scale.
SAFE USE
• Supervision by adults is always required.
• This product is not a toy and should consequently not be threaded like that.
• Never leave the baby alone with the scale but put the scale away when not in use.
• The scale is a precision instrument, do not drop it, jump on it or drop a heavy object
onto it. Prevent water penetrating the scale.
INSTALLATION
Power supply:
The BC-50 is battery powered:
1. Turn the scale upside down and put it on a blanket (to prevent damages).
2. Open the batterycover and install 2 batteries, 1.5V, size AA or penlite as indicated in
the battery compartment. Mind the polarity (+ and -).
3. Close the battery compartment.
The scale is now ready for use.
Only use batteries of the same brand and model. The use of alkaline batteries is prefer-
red. Rechargeable batteries are not suitable because of their too low voltage.
Placing & removing of the tray / platform:
1. Turn the scale upside down and put it on a blanket (to prevent damages).
2. Unlock the tray / platform by rotating the knob anti clockwise to "OPEN".
3. Place the tray / platform and fi x it by rotating the knob clockwise to "CLOSE"
Positioning of the scale:
• Place the scale on a fl at, fi rm surface.
• Make sure all four feet of the scale have direct contact to the surface.
• Place the scale securely far from the edge or counter of the surface the scale is stan-
ding on.
19
GB