Publicité
Les langues disponibles
Les langues disponibles
Menu operations
Menu item
USB *9
IPOD SWITCH *10
(iPod/iPhone control)
AUDIOBOOKS *10
PHONE *12
AUDIO
APPLICATION
DELETE PAIR
P. BOOK WAIT
SET PINCODE
AUTO CNNCT
INITIALIZE
INFORMATION
AM *14
AUX IN *14
BT AUDIO *15
SOFT VER
*9
Displayed only when the source is "USB FRONT/USB REAR".
*10 Displayed only when the source is "IPOD-FRONT/IPOD-REAR".
*11 If the USB Bluetooth Adapter is not connected to the unit, "PLEASE CNNT BT ADAPTER" scrolls
on the display.
*12 <CONNECT> will not be displayed if two Bluetooth phones are connected at the same time.
*13 Displayed only when a Bluetooth phone/audio player/application is connected.
*14 Displayed only when the unit is in any source other than the corresponding source "AM/AUX IN".
*15 Displayed only when the USB Bluetooth Adapter (KS-UBT1) is attached and current source is
not "BT FRONT/ BT REAR".
22
| ENGLISH
Selectable setting (Initial: [XX])
DRIVECHANGE: Selects to change the drive when a device with multiple
drives is connected to the USB input terminal (front/rear).
[HEAD MODE]/IPOD MODE/APP MODE:
For settings,
page 9.
NORMAL/FASTER/SLOWER: Selects the playback speed of the
Audiobooks sound file in your iPod/iPhone.
Initial selection depends on your iPod/iPhone setting.
CONNECT/DISCONNECT: Connects or disconnects the Bluetooth phone/
audio device. (
page 12)
CONNECT/DISCONNECT: Connects or disconnects the application in the
smart phone. (
page 13)
For settings,
page 13.
Copies up to 400 numbers from the phonebook memory of a connected
phone to the unit via OPP.
Changes the PIN code (1 to 6-digits). (Default PIN code: 0000)
Turn the control dial to select a number, press
position. After entering the PIN code, press the control dial to confirm.
[ON]: Establishes connection automatically with the Bluetooth device when
the unit is turned on.
OFF: Cancels.
YES: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.).
[NO]: Cancels.
PH CNNT DEV/AU CNNT DEV/APP CNT DEV *13: Displays connected
phone/audio/application device name.
MY BT NAME: Displays the unit name (JVC Unit).
MY ADDRESS: Shows address of USB Bluetooth Adapter.
[ON]/OFF: Enables or disables "AM" in source selection.
[AUX ON]/AUX OFF: Enables or disables "AUX IN" in source selection.
[BT AU ON]/BT AU OFF: Enables or disables "BT AUDIO" in source
selection.
Displays the firmware version of the unit.
/
to move to the entry
Publicité
