LG LF26C6360 Serie Manuel D'utilisation page 35

en-us_main.book.book Page 35 Wednesday, April 17, 2024 7:59 AM
• To increase ice production, use the Ice Plus
function. The function increases both ice making
and freezing capabilities.
In-Door Icemaker
Power Switch (some models)
a
Auto Shutoff (feeler arm)
b
Before Using the Freezer Icemaker
This feature is only available on some models.
The feature may vary depending on model
purchased.
NOTE
• Throw away the first bin full of ice after
installation. This is also necessary if the
refrigerator has not been used for a long time.
• The icemaker begins producing ice
approximately 48 hours after the appliance is
initially installed.
• The sound of ice dropping into the ice bin is
normal.
• If the ice bin is completely filled with ice, ice
production will stop.
• The amount and shape of ice may vary according
to the environment (ambient temperature
around the appliance, frequency of the door
being opened, amount of food stored in the
appliance, water pressure, etc.).
• In the event of a power outage, throw away the
ice stored in the ice bin.
Freezer Icemaker (Cubed Ice)
This feature is only available on some models.
Feeler Arm
a
Power Switch (some models)
b
NOTE
• This automatic freezer icemaker produces 12
cubes at a time, 50-110 pieces within a 24 hour
period if conditions are favorable. This amount
may vary according to the environment (ambient
temperature around the appliance, frequency of
the door being opened, amount of food stored
in the appliance, etc.).
• Ice cubes which are stored in the ice bin for a
long time may clump together and be difficult to
separate. If this happens, empty the ice bin
completely and clean it before reinstalling it.
Freezer Icemaker (Craft Ice
This feature is only available on some models.
Feeler Arm
a
Power Switch (some models)
b
CAUTION
• Do not insert round ice into the in-door ice bin,
as it can damage the ice and water dispenser.
NOTE
• The icemaker begins producing ice
approximately 48 hours after the appliance is
initially installed. The first batches of ice may not
be round and clear.
• Following installation or water filter
replacement, the first few batches of ice may be
semicircular or contain air bubbles.
• If the water pressure is less than 20 psi (138 kPa)
or a reverse osmosis system is used, the shape
of the ice may vary.
• The ice may look cloudy depending on the water
quality in the installation location and the
operating conditions.
OPERATION 35
TM
)