LG LF26C6360 Serie Manuel D'utilisation page 27

en-us_main.book.book Page 27 Wednesday, April 17, 2024 7:59 AM
Freezer
c
Indicates the set temperature of the freezer compartment in Celsius (°C) or Fahrenheit (°F). The default
freezer temperature is 0°F (-18 °C). Press the Freezer button repeatedly to select a new set
temperature from - 7 °F to 5 °F (-23 °C to -15 °C).
Refrigerator
d
Indicates the set temperature of the refrigerator compartment in Celsius (°C) or Fahrenheit (°F). The
default refrigerator temperature is 37 °F (3 °C). Press the Refrigerator button repeatedly to select a
new set temperature from 33 °F to 43 °F (1 °C to 7 °C).
NOTE
• To change the temperature mode from °F to °C (or vice versa) press and hold the Refrigerator and
Freezer buttons simultaneously for approximately five seconds. The temperature indicator on the
display window switches between Celsius and Fahrenheit.
• The displayed temperature is the target temperature, and not the actual temperature of the refrigerator.
The actual refrigerator temperature depends on the food inside the refrigerator.
Fresh Air Filter
e
The Fresh Air Filter helps remove odors from the refrigerator.
NOTE
• Replace the air filter when the
Filter button for three seconds to turn the icon light off. Replace the air filter approximately every six
months.
Lock
f
The lock function disables every other button on the display.
• When power is initially connected to the refrigerator, the lock function is off.
• To lock the control panel buttons, press and hold the Lock button until the
display and the function is activated.
• To disable the function, press and hold the Lock button for approximately three seconds.
Water Filter
g
Replace the water filter when the
Water Filter button for three seconds to turn the icon light off. Replace the water filter approximately
every six months.
Wi-Fi
h
The Wi-Fi button, when used with the LG ThinQ app, allows the refrigerator to connect to a home Wi-Fi
network. Refer to Smart Functions for information on the initial setup of the application.
The icon shows the status of the refrigerator's network connection. The icon illuminates when the
f
refrigerator is connected to the Wi-Fi network.
Press and hold the Wi-Fi button for 3 seconds to connect to the network. The icon blinks while the
connection is being made, then turns on once the connection is successfully made.
Measured Fill
i
The measured fill function dispenses premeasured amounts of water automatically.
Water & Ice Type
j
Select the desired dispenser mode from the buttons on the dispenser control panel. Press the
dispenser switch with a glass or other container to dispense cubed ice, water or crushed ice.
icon turns on. After replacing the air filter, press and hold the Fresh Air
g
h icon turns on. After replacing the water filter, press and hold the
OPERATION 27
k icon appears in the