Save A Cooking To A Number Key; How To Use The X2 Pad - Sammic HM-1001 Mode D'emploi

S
AVE A COOKING TO A NUMBER KEY
For frequently used cooking program, you can save it to a number key and conveniently activate it by touching the
number key.
Each of the number keys is pre-set with a cooking program. In waiting mode, touch any of the ten number pads,
you are selecting a cooking program.
The following are default settings for each of the number keys
Number/Memory Pads 1 2 3 4 5 6 7 8 9 0
Preset Cooking Time :10 :20 :30 :45 1:00 1:30 2:00 2:30 3:00 3:30
The user is free to reset the cooking program stored under each of the ten number keys anytime. In order to set a
cooking program, which may contain up to 3 stages consecutive cooking periods with different power levels, and to
designate a number key to this program, see the example in the following table:
To set medium power cooking for 8 min. and save it to number pad 5:
1. Touch PROG once.
2. Press number pad 5.
3. Press POWER LEVEL twice.
4. Touch number pads 8,0,0
, ,
5. Press PROG to save.
You can set a two or three stages cooking program by repeating the steps 3-4 once or twice. After finished, press
STOP/RESET to return to waiting mode.
Note: If you want the oven to start after you touching the START pad instead of immediately after you touching
any of the number keys, press and hold down STOP/RESET for 5 sec; now you have to press START pad after
selecting a cooking program by touching any of the number keys.
H X2
OW TO USE THE PAD
More cooking programs can be stored under the number keys by using the X2 function.
In waiting mode, press X2 and then any of the number keys, you can recall a preset cooking program as follows:
Number/Memory Pads 1 2 3 4 5 6 7 8 9 0
Preset Cooking Time :20 :40 1:00 1:30 2:00 3:00 4:00 5:00 6:00 7:00
6