Publicité
Les langues disponibles
Les langues disponibles
Uninstallation & Return
34
6
F Check for voltage at power cable terminal.
G Disconnect the communication cable from the
communication port.
H Disconnect the power cable from the terminal
block. Disconnect the positive terminal (+) a
first, and next the negative terminal (−) b and
finally ground terminal c
I Assemble transparent protection cover. Close
the wiring box cover, and fasten the screws.
ON
OFF
J Loosen the two hex-socket screws using a
socket wrench to detach the battery pack from
the wall using lift handles.
According to regional regulations, several people
may be required for moving equipment.
K Repack in Box (See 3.1.1)
CAUTION
Publicité
