SEVERIN HV 7158 Mode D'emploi page 21

HV7158.book Seite 21 Dienstag, 19. April 2016 10:28 10
Troubleshooting
Troubleshooting by yourself
5 Troubleshooting
So that as few problems as possible arise, it is important to empty the dust bin regularly and to take
this opportunity to check/clean the motor protection filter.
Problem
Appliance can not
be switched on.
The appliance can
not be charged
(LEDs don`t blink).
The appliance
hardly picks up any
dust.
Operating duration
is becoming pro-
gressively shorter.
The brush roller ro-
tates slowly or ir-
regularly.
Service hotline
If you can not solve the problem using the table above, call our Service hotline (see contact infor-
mation in the appendix to this instruction manual).
Ordering spare parts
Spare parts and accessories can be ordered via https://shop.severin.com/shop/search or via our
customer service.
Item number
106-048
1656-048
881-048
Possible cause / solution
Make sure that has been pressed and held for longer than 2 seconds in
order to switch on the appliance. This is a safety function which is designed
to prevent the appliance from being switched on unintentionally.
Rechargeable battery is completely discharged. Switch off the appliance
and charge rechargeable battery, chapter „Charging and operating the
appliance".
Mains adapter is not plugged in correctly. Check whether the mains adapter
or adapter plug is seated properly in the outlet (chapter „Charging and
operating the appliance").
The rechargeable battery has not been inserted correctly. Disconnect the
mains adapter. Reinsert the rechargeable battery into the appliance. Con-
nect the mains adapter again.
The dust bin needs to be emptied or the motor protection filter and the cy-
clone unit need to be cleaned, chapter „Emptying the dust bin".
The brush roller is soiled and needs to be cleaned, chapter „Cleaning the
brush roller".
The brush roller is soiled and needs to be cleaned, chapter „Cleaning the
brush roller".
motor protection filter
brush roller
rechargeable battery 22.2 V
Description
21