Télécharger Imprimer la page

Marathon CL030066-FD-NA Mode D'emploi page 8

Publicité

Les langues disponibles

Les langues disponibles

Thermometer
Press the
button to set temperature in Celsius or Fahrenheit.
°C/°F
If the temperature is out of the measurable range, LL.L (beyond the
minimum temperature) or HH.H (beyond the maximum temperature) will
be shown on the LCD.
NOTE: The clock might not work properly if the temperature is higher
than 50°C.
Specifications
Temperature Measurable range
Indoor Temperature:
-9.9°C to 60°C / 14.2°F to 140°F
Outdoor Temperature:
-20°C to 50°C / -4°F to 122°F
Thermometer Probe:
-50°C to 70°C/-58°F to 158°F
Temperature Checking Interval
Main Unit:
Every 60 seconds
Outdoor Remote Sensor:
Approx. every 60 seconds
Outdoor Remote Sensor RF Transmission
Frequency :
433MHz
Range:
Up to 100meters (open area)
Transmission:
Approx. every 60 seconds
Power Source
Main Unit:
4 x AA batteries, 1.5V batteries
Outdoor Remote Sensor:
2 x AA batteries, 1.5V batteries
Precautions
The clock loses its time information when the battery is removed.
Do not subject the clock to excessive force or shock.
Do not expose it to extreme temperatures, direct sunlight, dust, or
moisture.
Avoid contact with corrosive materials. Do not clean the device using
abrasive or corrosive materials or products. Abrasive cleaning agents may
scratch the plastic parts and corrode the electronic circuits.
Do not tamper with any of the internal components of this clock. This
may cause damage to the components.
EN

Publicité

loading