Marathon CL030066-FD-NA Mode D'emploi page 4

D1
Outdoor Remote Sensor
D1: Temperature display
D2: Wall mount hole
D3: button
RESET
D4: Battery compartment
D5: Temperature probe connection
Battery installation
Open the battery cover on the unit and insert 4x new AA batteries,
observing the correct "+" and "-" polarity.
D2
The unit can be placed onto any flat surface by using the built-in stand,
or placed onto any wall using the wall mount at the back of the unit. It is
recommended you place the clock near a window or in a location with good
reception as the automatic time setting requires a strong radio-wave signal.
D3
D4
Low Battery Indication
The low battery icon
D5
low, to indicate the batteries should be replaced.
will appear on the display when the batteries are
EN