Overview Of Parts; Technical Data - Uebler i21 Notice De Montage Et D'utilisation

Fahrradträger_i21-i31.book Seite 11 Mittwoch, 19. April 2017 10:56 10
Dear customer,
Thank you for choosing to buy an UEBLER cycle rack.
The work and safety instructions described in these
mounting and operating instructions must be observed
at all times. No liability will be accepted for any damage
caused by failure to observe these instructions.
Note
Mounting and operation is described here for the Uebler i21
cycle rack. For the Uebler i31 cycle rack, proceed analogously.

Overview of parts

2 3
8
13
9
Part number
Uebler i21 cycle rack for 2 bicycles
Order no. 15900 (left-hand drive)
Order no. 15901 (right-hand drive)
Uebler i21 cycle rack for 2 bicycles (90° opening angle version)
Order no. 15930 (left-hand drive)
Order no. 15931 (right-hand drive)
Uebler i31 cycle rack for 3 bicycles
Order no. 15910 (left-hand drive)
Order no. 15911 (right-hand drive)
4 5
1
11
6
7
12
10
7
8
M+P-25A-0203
EC operating permit number
26R-030086
Scope of delivery
Designation
1 Cycle rack
2 Holder for 1st bicycle
3 Holder for 2nd bicycle
4 Holder for 3rd bicycle
5 keys
Note
We reserve the right to make changes to the scope of delivery.
Always have parts repaired or replaced by a specialist
workshop. Uebler recommends using genuine spare parts
only. These are available from specialist retailers.
Note
Holders (2), (3) and (4) are enclosed separately in the scope of
supply and are not pre-installed. The keys (5) are inserted in
the lock in each holder (2), (3) and (4) and in the lock for
the securing lever (11).
Designation of parts
Designation
6 Rack frame
7 Quick-acting clamp for rack frame
8 Wheel rails
9 Rear lights
10 Towbar receptacle
11 Securing lever for towbar receptacle
12 Plug for lighting system
13 Registration plate holder

Technical data

Unladen weight
Uebler i21, for max. 2 bicycles
Uebler i31, for max. 3 bicycles
Maximum additional load
(carrying capacity)
1
Uebler i21, from D-value 5.3 kN
- with min. supporting load 110 lbs (50 kg)
1
Uebler i21, from D-value 6.7 kN
- with min. supporting load 110 lbs (50 kg)
- with min. supporting load 165 lbs (75 kg)
1
Uebler i31, from D-value 5.3 kN
1
Uebler i31, from D-value 6.7 kN
- with min. supporting load 110 lbs (50 kg)
- with min. supporting load 165 lbs (75 kg)
1. see type plate on towbar
2. not permissible
- 11 -
i21 i31
Quantity Quantity
1 1
1 1
1 1
– 1
6 8
i21 i31
Quantity Quantity
1 1
2 2
4 6
2 2
1 1
1 1
1 1
1 1
approx. 29 lbs (13 kg)
approx. 35 lbs (16 kg)
82 lbs (37 kg)
82 lbs (37 kg)
132 lbs (60 kg)
2
--
75 lbs (34 kg)
119 lbs (54 kg)