Belling 90Ei Mode D'emploi page 186

Note: If the minute minder has also been set it will be displayed first. In this case other timed cooking
zones are shown by a dot in the cook zone display.
Pan Detection
The hob only uses power when a suitable pan is placed on the zone, this reduces the energy used dur-
ing the cooking process, i.e. when you take your pan off the zone the hob automatically turns the power
off, and only switches back on when you replace the pan.
Bridge function
1
Press the linked cook zones keys together.
The cooking zones can be used as four separate cooking zones which can be controlled individually.
Or, the two left hand zones and the two right hand zones can be bridged to provide two large zones that
can be controlled via one setting.
Large pans and griddle plates can be placed across these two bridged zones.
Residual heat indicators
This feature not only warns you against hot surfaces but also indicates that there is residual heat which
can be used as temporary warm zone.
Note: The cook zone itself does not heat up, but the ceramic glass does get hot because of the hot pan
conducting heat back onto the hob glass.
2
Bridge symbol will appear in the right or left front
cook zone