Publicité
Les langues disponibles
Les langues disponibles
hob Overview
Function
Power Level
Cook zone timer
Residual Heat
Automatic switch off
Pan detection
Booster function
Bridge function
Recall function
Child lock
Description
Once a cook zone is selected, a power level can be set to a
low or high temperature.
Once a cook zone is selected, the cook zone timer can be activated
to sound after a pre-determined amount of time. When the alarm
sounds and the dot begins to flash, the cook zone will turn off.
After use, the cooking surface remains hot and the residual
heat symbol will be displayed. As it cools, the number of
rings will reduce until they disappear from the display.
Each cook zone is pre-set with a maximum operation time.
Once this time is reached, the zone will automatically switch
off. The residual heat symbol will be displayed if the surface
If no pan or an unsuitable pan is detected on an activated
cook zone, the pan detection symbol will be displayed.
Suitable pans - cast iron, metals with magnetic properties.
Non-suitable pans - copper, stainless steel, aluminium,
glass, ceramic, terra-cotta.
The booster function temporarily increases the power to a
cook zone allowing for a faster heat up time. It will deactivate
automatically after 10 minutes or if a lower power level is
Individual cook zones can be bridged or joined together to
create a larger, single controlled cook zone. By bridging the
left hand front and rear zones or the right hand front and rear
zones, two larger cook zones can be created.
While the hob is in use, if it is accidentally turned off, turn
the hob back on within 6 seconds and the settings will be
Child lock can be activated to stop the hob from being
accidentally turned on.
remains hot.
selected.
restored.
Symbol
1-9
N/A
N/A
Publicité
