Publicité
Les langues disponibles
Les langues disponibles
Overview of the components
1. Carrying handle
3. Front cowl clap
5. Power cord winding button
7. Floor attachment
9. Dust bag fill indicator
11. Multi-purpose crevice nozzle with a brush
13. Power cable
Before using for the first time
1. Take the vacuum cleaner out of the packaging.
2. Check that the dust bag is correctly fitted.
3. Remove the packaging and check that the dust bag and safety filter are correctly fitted.
Operation
1. Place the vacuum cleaner in the horizontal position.
2. Insert the connection head of the suction hose into the
hose connector until it locks in place. To do so, please press
the buttons simultaneously. To release the hose again,
please press the buttons once more on the connection
head. Keep the buttons pressed down and then pull out the
hose.
3. Insert the vacuum tube into the handle if required and then
assemble the floor nozzle and/or the accessories.
4. Unwind the length of cable you require. To rewind the power cable, press the rewind
button with one hand, and guide the cable with the other hand to avoid wrapping.
CAUTION: Pull out the cable up to the maximum length indicated with the
YELLOW mark. Never pull the cable out up to the RED mark as the cable winding
can be damaged.
Instructions for use
2. Telescopic tube
4. Speed control button
6. Power ON/OFF switch
8. Floor attachment flap
10. Flexible hose
12. Parking slot
14. Air discharge Filter HEPA
English
3
Publicité
