Bellcome 1 Série Manuel D'utilisation page 31

Significance of LEDs signaling on SCU
BUTTON LED
PROG PROG
Long press
RED
For LED signaling RED, see ch. 7 – Troubleshooting.
6.4. Use of the outdoor panel (APA)
TORX Fixing screw
! It must be screwed completely
- Antitheft alarm protection
6.4.1 Functioning
STAND-BY
CALL
END CALL
TALK
ACCESS being granted
LED
S1
The system is not connected to the 230 Va.c./ 50 Hz network.
The system is OK, connected to the 230 Va.c./ 50 Hz network.
GREEN
Programming mode
GREEN
Residents' names
TORX Fixing screw
The call keys and the residents` names are permanently backlit.
Short touch of
Each touch of the key reactivates the call.
After 1 min. since the last call.
The resident answers
any key. The talk duration is max. 2 min.
The lock is open for the set temporization on SCU (between 1 and
10 sec.). The panel emits a sequence of beeps for confirmation.
(The kit is already programmed.)
Name 3
Name 2
Name 1
Acoustical signaling with a ding-dong.
Hands-free conversation, without touching
29
Microphone
Call key (touch)
Loudspeaker