Rowenta X-TREM POWER RO542111 Mode D'emploi page 13

EN
DESCRIPTION
21 ERGO COMFORT* metal telescopic tube
a - Handle/tube locking system (LOCK SYSTEM)
b - Tube adjustment button
22 Standard* all surface floor nozzle
23 Delta Silence* all surface floor nozzle
BEFORE USE
1 • Unpacking
Unpack your appliance and remove any stickers. Keep your
guarantee in a safe place and read the instructions carefully
before using your appliance for the first time.
2 • Hints and precautions
The power cord should be unwound completely before using
the appliance.
Do not snag or pinch the power cord, and avoid trailing it over
sharp edges. If you use an extension cord, ensure that it is in
perfect condition and appropriate to the power rating of your
vacuum cleaner. Never unplug your appliance by pulling on
the power cord.
VACUUMING
1 • Assembling the parts of the
appliance
Slot the hose into the suction opening (fig.1) and turn until it
locks. To remove, turn in the opposite direction and pull
(Fig 2)
• Slide the metal telescopic tube (20 or 21)* onto the end of
the handle (18a or 19a)* (fig.3) (depending on model)
• Fit the floor nozzle (22 or 23)* (depending on model) to the
end of the metal telescopic tube (Fig.4)
• Set the metal telescopic tube to the required length using
the telescopic adjustment system (fig.5)
Fit the appropriate accessory to the end of the metal
telescopic tube or the handle:
- For rugs and carpets: use the all surface floor nozzle (22 or
23)* in the brush retracted or Turbo brush* position (fibres
and animal hair).
*Depending on model: equipment specific
to certain models or optional accessories.
24 Crevice tool*
25 Parquet floor nozzle*
26 Turbo brush*
27 Mini turbo brush*
Never use your vacuum cleaner without a dust bag and
filtration system (cartridge).
To avoid the above, your appliance is equipped with a security
system (14) to detect the presence of filter cartridges (15a*,
15b*, 16*).
Never move the vacuum cleaner by pulling the power cord,
the appliance should always be moved using the transport
handle. Do not use the power cord to lift the appliance.
Switch off and unplug your vacuum cleaner after use. Always
switch off and unplug your vacuum cleaner for maintenance
or cleaning. Only use genuine Rowenta or Wonderbag dust
bags and filters.
Only use genuine Rowenta accessories. Check that all the
filters are correctly installed.
If you have any difficulty obtaining accessories and filters for
this vacuum cleaner, contact Rowenta customer services.
- For parquet and smooth flooring: use the all surface floor
nozzle (22 or 23)* in brush extended position, or for best
results use the parquet floor nozzle*.
- For corners and difficult areas: use the crevice tool*.
- For furniture and fragile surfaces: use the built-in brush
ERGO COMFORT (EASY BRUSH) (depending on model).
IMPORTANT: Never use the vacuum cleaner without a
dust bag and filter (cartridge)
WARNING: Always switch off and unplug your vacuum
cleaner before changing the accessories.
2 • Plugging in the power cord and
switching on the appliance
Completely unwind the power cord, plug in your vacuum
cleaner (fig.6) and press the On/Off pedal (fig.7).
8